time(sec.) 0 50 100 150 temperature ( ) 200 260 mechanical specification unit: mm (inch) pin configuration derating curve reflow soldering curve ta ( ) load (%) -40 0 25 50 85 70 80 100 100 -vin +vin nc -vout nc nc +vout nc nc nc 1 pin no. output 23 5 6 7 8 10 11 12 peak. temp 260 10 sec. max. 90 sec. max. (>220 ) 220 3000vdc i/o isolation internal smd technology protection: short circuit non-conductive plastic case cooling by free air convection smd package styles 100% full load burn-in test low cost / high reliability approved: ul / cul 1 year warranty specification sft01l-05 70% 0 ~ 200ma 5v sft01m-05 70% order no. dc output voltage output current range efficiency rated power output switching frequency(typ.) normal voltage input current input environment safety & emc withstand voltage safety standards isolation resistance working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note weight overload short circuit protection momentary momentary i/p-o/p:3kvdc ul60950-1, csa c22.2 i/p-o/p: 100m ohms / 500vdc / 25 / 70% rh 500khrs min. mil-hdbk-217f(25 ) -40 ~ +85 (refer to output load derating curve) 20% ~ 90% rh non-condensing -40 ~ +105 , 10 ~ 95% rh 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1 cycle, period for 60min. each along x, y, z axes 15.24*7.5*6.5mm or 0.6"*0.295"*0.24" inch (l*w*h) 1.7g 1.all parameters are specified at normal input, rated load, 25 70% rh ambi ent. 2.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 3.line regulation is measured from low line to high line at rated load. 4.load regulation is measured from 20% to 100% rated load. full load no load 123ma 264ma 30ma 5v 123ma 19ma 12v 264ma 30ma 123ma 19ma 12v 264ma 30ma 5v 264ma 30ma 5v voltage range 10.8 ~ 13.2v 4.5 ~ 5.5v 10.8 ~ 13.2v 4.5 ~ 5.5v 10.8 ~ 13.2v 4.5 ~ 5.5v 4.5 ~ 5.5v 100khz 8.0% 8.0% 1.2% for 1% input variation 100mvp-p 1w 10.8 ~ 13.2v 123ma 19ma 12v features : protection type : broken protection type : broken ripple & noise (max.) note.2 line regulation note.3 load regulation note.4 voltage tolerance 1w dc-dc unregulated single output converter s f t 0 1 s e r i e s sft01l-09 75% 0 ~ 111ma 9v sft01m-09 73% sft01l-12 78% 0 ~ 84ma 12v sft01m-12 73% sft01l-15 79% 0 ~ 67ma 15v sft01m-15 74% 19ma 12v 5v file name: sft01-spec 2009-12-22 protection fuse recommended f0505t-1w f1205t-1w model no. f0509t-1w f1209t-1w f0512t-1w f1212t-1w f0515t-1w f1215t -1w 7 8 1 0 1 1 1 2 6 5 3 2 1 15.24 12.7 top view 2.54 0.6 0.05 6.25 1.27 0.25 7.5 11.2 max 4.25 6.5
|
